Tag Archive for: Skin Sensitization

Evaluation of the applicability of GARDskin to predict skin sensitizers in extracts from medical device materials

Peer-reviewed article in Frontiers in Toxicology.

The application of GARD®skin to predict potential skin sensitizers in extracts from Medical Device materials has recently been published in a peer-reviewed article in Frontiers in Toxicology.

The study results provide evidence recognizing the GARD®skin Medical Device assay as a scientifically sound and ethical alternative to conventional animal methods, compatible with both polar and non-polar extraction vehicles, in line with the ISO 10993-12:2021 standard.

We are proud to provide the only OECD-validated in vitro assay for sensitization that is fully compatible with testing requirements specified in ISO 10993-12.

Jenvert Rose-Marie, Larne Olivia, Johansson Angelica, Berglin Mattias, Pedersen Emma, Johansson Henrik
Frontiers in Toxicology, Volume 6, 2024,ISSN 2673-3080
DOI=10.3389/ftox.2024.1320367

Keywords

GARD™; In vitro; Skin sensitisation; NAMs; Medical Device, ISO 10993, Biocompatibility

Abstract

Biocompatibility testing of medical devices is governed by the ISO 10993 series of standards and includes evaluation of skin sensitization potential of the final product. A majority of all medical devices are tested using in vivo methods, largely due to the lack of in vitro methods validated within the applicability domain of solid materials. The GARDskin method for assessment of chemical skin sensitizers is a validated method included in the OECD Test Guideline 442E, based on evaluation of transcriptional patterns of an endpoint-specific genomic biomarker signature in a dendritic cell-like cell, following test chemical exposure. The current study aimed to evaluate the applicability of GARDskin for the purpose of testing solid materials by incorporation of extraction procedures described in ISO 10993-12:2021, as well as to demonstrate the functionality of the proposed protocols, by testing of custom-made materials spiked with sensitizing agents. It was shown that GARDskin is compatible with both polar and non-polar extraction vehicles frequently used for the purpose of medical device biological testing. Further, exploring three different material types spiked with up to four different sensitizing agents, as well as three unspiked control materials and commercial reference products, it was shown that the method correctly classified all evaluated test materials. Taken together, the data presented suggest that GARDskin may constitute a valid alternative to in vivo experimentation for the purpose of skin sensitization assessment of medical devices.

 

Joint publication with Corteva Agriscience: GARD™skin and GARD™potency: A proof-of-concept study investigating applicability domain for agrochemical formulations

New joint publication with Corteva Agriscience.

SenzaGen scientists, alongside the toxicology team at Corteva Agriscience, have recently published a joint study in Regulatory Toxicology and Pharmacology, presenting new peer-reviewed evidence on the applicability of GARD® for agrochemical formulations.

The study demonstrates a satisfactory performance of GARD®skin and GARD®potency for skin sensitization hazard and GHS potency categorization of tested agrochemical formulations.

Marco Corvaro, Joseph Henriquez, Raja Settivari, Ulrika Mattson, Andy Forreryd, Robin Gradin, Henrik Johansson, Sean Gehen,
Regulatory Toxicology and Pharmacology, Volume 148, 2024, 105595, ISSN 0273-2300,
https://doi.org/10.1016/j.yrtph.2024.105595.

Keywords

GARD™; In vitro; Skin sensitisation; NAMs; Agrochemical formulations

Highlights

  • Tested 42 agrochemical formulations to expand applicability domain of GARD.

  • GARDskin showed good accuracy (76.2%), sensitivity (85.0%) and specificity (68.2%).
  • GARDpotency correctly subcategorized 14/17, correctly predicted sensitisers.
  • GARD satisfactory for Key Event 3 characterisation of agrochemical formulations.


Abstract

Several New Approach Methodologies (NAMs) for hazard assessment of skin sensitisers have been formally validated. However, data regarding their applicability on certain product classes are limited. The purpose of this project was to provide initial evidence on the applicability domain of GARD™skin and GARD™potency for the product class of agrochemical formulations.

For this proof of concept, 30 liquid and 12 solid agrochemical formulations were tested in GARDskin for hazard predictions. Formulations predicted as sensitisers were further evaluated in the GARDpotency assay to determine GHS skin sensitisation category. The selected formulations were of product types, efficacy groups and sensitisation hazard classes representative of the industry’s products.

The performance of GARDskin was estimated by comparing results to existing in vivo animal data. The overall accuracy, sensitivity, and specificity were 76.2% (32/42), 85.0% (17/20), and 68.2% (15/22), respectively, with the predictivity for liquid formulations being slightly higher compared to the solid formulations. GARDpotency correctly subcategorized 14 out of the 17 correctly predicted sensitisers. Lack of concordance was justifiable by compositional or borderline response analysis. In conclusion, GARDskin and GARDpotency showed satisfactory performance in this initial proof-of-concept study, which supports consideration of agrochemical formulations being within the applicability domain of the test methods.

 

New scientific publication by ExxonMobil: Challenges integrating skin sensitization data for assessment of difficult to test substances

New scientific publication by ExxonMobil.

Check out this newly published article by ExxonMobil focusing on the challenges of determining skin sensitization hazard in the case of difficult-to-test substances with conflicting or low-confidence data, where GARDskin data on UVCBs and hydrophobic substances provides valuable input for the integrated hazard assessment.

The article provides new peer-reviewed evidence for the applicability domain of GARDskin on UVCBs, hydrophobic and highly complex substances.

Greminger A, Frasca J, Goyak K, North C. 
Challenges integrating skin sensitization data for assessment of difficult to test substances. 
ALTEX - Alternatives to animal experimentation, published Oct 12, 2023
doi: 10.14573/altex.2201122. Epub ahead of print. PMID: 37843019.

Keywords

LLNA; ToxPi; new approach methodologies; skin sensitization; weight of evidence.


Abstract

Difficult to test substances including poorly soluble, mildly irritating, or Unknown or Variable Composition Complex reaction products or Biological Materials (UVCBs), producing weak or borderline in vivo results, face additional challenges in in vitro assays that often necessitates data integration in a weight of evidence (WOE) approach to inform skin sensitization potential. Here we present several case studies on difficult to test substances and highlight the utility of Toxicological Prioritization Index (ToxPi) as a data visualization tool to compare skin sensitization biological activity. The case study test substances represent two poorly soluble substances, tetrakis (2-ethylbutyl) orthosilicate and decyl palmitate, and two UVCB substances, alkylated anisole and hydrazinecarboximidamide, 2-[(2-hydroxyphenyl)methylene]-, reaction products with 2 undecanone. Data from key events within the skin sensitization adverse outcome pathway were gathered from publicly available sources or specifically generated. Incorporating the data for these case study test substances as well as on chemicals of a known sensitization class (sensitizer, irritating non-sensitizer, and non-sensitizer) into ToxPi produced biological activity profiles which were grouped using unsupervised hierarchical clustering. Three of the case study test substances concluded to lack skin sensitization potential by traditional WOE produced biological activity profiles most consistent with non-sensitizing substances, whereas the prediction was less definitive for a substance considered positive by traditional WOE. Visualizing the data using bioactivity profiles can provide further support for WOE conclusions in certain circumstances but is unlikely to replace WOE as a stand-alone prediction due to limitations of the method including the impact of missing data points.

 

Joint poster with DSM: Case study on process-related impurities in polymeric materials

In vitro assessment of skin sensitizing potential of process-related impurities in polymeric materials during product development.

Presented at 2022 ESTIV

 

Abstract

Andy Forreryd1, Stefan Kaiser2, Roman Goy2, Florian Glaus2, Ulrika Mattson1, Robin Gradin1, Henrik Johansson1

1 SenzaGen AB, 22381 Lund, Sweden

2 DSM Nutritional Products Ltd, 4303 Kaiseraugst, Switzerland

Skin sensitization testing represents a key toxicological endpoint during safety evaluation of ingredients intended for consumer products with topical exposure, both in a regulatory context and during product development, to early understand the toxicological profile of the end-product and potential impurities.

The inclusion of New Approach Methods (NAMs) for skin sensitization testing into OECD TGs have resulted in a broader acceptance of such methods as replacements to animal models. However, these methods are not universally applicable, and compounds with certain properties, such as lipophilicity, or of complex composition, are frequently considered outside the applicability domain.

GARDskin is a genomic-based next-generation in vitro assay for assessment of skin sensitizers progressing towards regulatory acceptance. The assay is highly sensitive, is compatible with a variety of solvents and has a demonstrated applicability for testing of lipophilic materials.

The aim of this study was to evaluate the skin sensitization potential of a lipophilic polymeric material (Mw > 2000g/mol) containing approximately 2% impurities, during product development. The polymeric material was initially flagged as a skin sensitizer. A preparative procedure was applied to purify the polymer from impurities, while generating enriched by-product fractions (oligomeric fraction, Mw: 500-1000 g/mol and small molecule fraction, Mw: <500 g/mol). The fractions were evaluated in GARDskin, using acetone or DMSO as solvents, and classified as skin sensitizers (by-products) and non-sensitizers (purified polymers, n=2), respectively, indicating that the impurities were responsible for the positive classification of the initial non-purified polymeric material.

In conclusion, the GARDskin protocol enabled for testing of the lipophilic materials, using a selection of solvents to increase solubility. Results from this study informed that actions to reduce concentration of impurities may be a useful strategy to prevent skin sensitization properties of the final end-product, highlighting the importance of skin sensitization testing during the production development.

The GARDskin assay: Investigation of the applicability domain for metals

Joint publication with Johnson Matthey

ALTEX – Alternatives to animal experimentation, published Nov 03, 2022, accepted manuscript

DOI: https://doi.org/10.14573/altex.2203021

Forreryd, A., Gradin, R., Larne, O., Rajapakse, N., Deag, E. and Johansson, H.


Abstract

New approach methods (NAMs) for hazard identification of skin sensitizing chemicals have been adopted as test guidelines by the OECD during the last decade as alternatives to animal models. These models align to individual key events (KE) in the adverse outcome pathway (AOP) for skin sensitization for which the molecular initiating event (MIE) is covalent binding to proteins. As it currently stands, the AOP does not include mechanistic events of sensitization by metals, and limited information is available on whether NAMs accurately the predict sensitization potential of such molecules, which have been proposed to act via alternative mechanisms to organic chemicals.

Methods for assessing the sensitization potential of metals would comprise valuable tools to support risk management within e.g., occupational settings during production of new metal salts or within the medical device industry to evaluate leachables from metal alloys.

This paper describes a systematic evaluation of the applicability domain of the GARD™skin assay for assessment of metals. Hazard classifications were supplemented with an extended analysis of gene expression profiles induced by metal sensitizers to compare the induction of toxicity pathways between metals and organic sensitizers. Based on the results of this study, the accuracy, sensitivity, and specificity of GARD™skin for prediction of skin sensitizing hazard were 92% (12/13), 100% (7/7) and 83% (5/6), respectively.

Thus, the performance of GARD™skin for assessment of metals was found to be similar to what is observed on conventional organic substances, providing support for inclusion of metals within the applicability domain of the test method.

Keywords

skin sensitization, metals, regulatory testing, medical devices

Full article on line with open access

Next Generation Risk Assessment (NGRA) using NAMs for skin sensitization: Reproducibility and precision of the GARDskin Dose-Response assay for PoD determination of fragrance chemicals.

Presented at ASCCT 2022

Next Generation Risk Assessment (NGRA) using NAMs for skin sensitization: Reproducibility and precision of the GARDskin Dose-Response assay for PoD determination of fragrance chemicals.

Andy Forreryd1, Shashi Donthamsetty2, Paul Sterchele2, Xiao Huang2, Gregory Ladics2, Mihwa Na3, Isabelle Lee3, Anne Marie Api3, Robin Gradin1, Henrik Johansson1
1SenzaGen, Lund, Sweden , 2International Flavors & Fragrances, Hazlet, NJ, USA, 3Research Institute for Fragrance Materials. Woodcliff lake, NJ, USA

Download a copy

 

Conclusion

  • GARD®skin Dose-Response can be used for continous predictions of skin sensitizing potency.
  • The continous readout from the assay is reproducible and the assay predicts LLNA EC3 and human NESIL values with high correlation to reference benchmark data.
  • The assay provides a nice tool for the fragrance industry to predict the NESIL value which can be used for conducting the quantitative risk assessment for generating the IFRA standard.

Abstract

New Approach Methods (NAMs) for assessment of skin sensitizers have been adopted as Test Guidelines (TGs) by OECD. When combined into Integrated Approaches to Testing and Assessment (IATA) or defined approaches (DA), they provide data supporting hazard classifications and GHS potency subcategorization. However, more granular potency information, preferably on a continuous scale, is needed to derive a point-of-departure (PoD) for Next Generation Risk Assessment (NGRA).

GARDskin was recently adopted into OECD TG 442E to support discrimination of skin sensitizers and non-sensitizers. Continous potency predictions are derived using a modified protocol that incorporates dose-response measurements. Linear regression models have further been developed to predict LLNA EC3 and human NOEL values. The aim of the following study, which represents a cross-sector collaboration was to evaluate precision and reproducibility of the potency predictions from GARDskin Dose-Response in blinded studies.

Preliminary results from estimate of precision (n=36 materials) indicated that GARDskin Dose-Response predicted LLNA EC3/ human NOEL values with median fold-misprediction factors < 3.0 and < 2.0, respectively. Interestingly, LLNA predicted human NOEL with a fold-change > 2 in the same dataset. For reproducibility assessment, test materials (n=11) were evaluated in separate experiments (n=3), which generated highly reproducible results, with an average median range of fold-changes between replicates of 2.5.

Results from this study demonstrate that continous potency predictions from GARDskin Dose-Response are reproducible. Together with performance data, this represents a major step towards establishment of the assay as a relevant source of information to derive a PoD for NGRA, avoiding generation of new animal data.

 

 

 

The use of the GARD®skin Dose-Response assay to assess skin sensitizing potency in developing novel fragrance ingredients

Presented at ASCCT 2022

The use of the GARD®skin Dose-Response assay to assess skin sensitizing potency in developing novel fragrance ingredients

Tim Lindberg1, Christopher Choi2, Ulrika Mattson1 and Satoshi Sasaki3
1SenzaGen, Lund, Sweden , 2Takasago International Corp, Rockleigh NJ, USA ,3Takasago International Corp, Hiratsuka city, Kanagawa, Japan

Download a copy

 

Conclusion

The present study aimed at investigating the skin sensitizing potency of two novel fragrances, Fragrance 1 and 2, using three NAMs, the kDPRA, KeratinoSens and GARD®skin Dose-Response assays.

To move away from traditional safety testing, which includes animal studies, there is a paradigm shift towards the use of multiple NAMs in a weight-of-evidence approach when risk assessment of novel fragrance ingredients are conducted. However, the lack of established potency assays puts the alternative methods at a disadvantage as compared to the in vivo counterparts.

  • Fragrance 1 showed similar results across the three NAMs, with the GARD®skin Dose-Response assay predicting the cDV0–value to 18.4 µM, which in turn was used to predict a NESIL-value of 659 µg/cm2.
  • For Fragrance 2, equivocal results were seen, where the kDPRA assay predicting the ingredient not to be a category 1A skin sensitizer while KeratinoSens predicted it as a non-skin sensitizer. GARD®skin Dose-Response predicted the cDV0–value to 296 µM, which was used to predict a NESIL-value of 16600 µg/cm2. Combining the results from all three NAM assays, a confirmatory HRIPT testing concentration was determined for both ingredients, 562.5 µg/cm2 and 15000 µg/cm2 for Fragrance 1 and Fragrance 2, respectively.

In conclusion the data presented here show how the use of the GARD®skin Dose-Response assay in combination with other NAMs can be used as a replacement of animal studies for quantitative risk assessment of novel fragrance materials.

Abstract

Skin sensitization is one of the required endpoints for the development and registration of novel fragrance ingredients. Traditionally, testing has been performed using a combination of in vitro and in vivo assays, but recent developments has shifted the paradigm towards the use of New Approach Methodologies (NAMs), without the need for in vivo methods. However, none of the proposed NAMs are currently validated for continuous potency predictions, which is required for quantitative risk assessments of novel fragrance ingredients.

The GARD®skin assay (OECD TG 442E) is a genomics-based assay for hazard identification of sensitizers. To meet the need for quantitative potency information, GARD®skin Dose-Response has been developed based on the validated protocols of GARD®skin and generates a dose-response curve to identify the lowest concentration of a test compound required to elicit a positive classification (cDV0 value). These values correlate significantly to LLNA EC3 and human NESIL values.

The aim of this study was to investigate the sensitizing potency of two novel fragrance ingredients and to identify predicted non-sensitizing levels. Testing was performed in GARD®skin Dose-Response, with predicted EC3 and NESIL values of 1.93% and 27.8%, and 659µg/cm2 and 16600µg/cm2, for fragrance ingredients 1 and 2, respectively. These results in combination with data from kDPRA, KeratinoSens and in silico read- across, established the concentrations for confirmatory HRIPT testing (562.5µg/cm2 and 15000µg/cm2).

In conclusion, this study demonstrates how GARD®skin Dose-Response combined with other NAMs can be used for risk assessments and to establish a concentration for confirmatory HRIPT testing of novel fragrance ingredients.

 

 

The GARDskin Assay: Investigation of the Applicability Domain of Indirectly Acting Haptens

Presented at the 2022 SOT

Tim Lindberg1, Andy Forreryd1, Robin Gradin1 and Henrik Johansson1
1SenzaGen, Lund, Sweden

Download a copy

 

Conclusion

  • The GARD®skin assay can accurately predict indirectly acting haptens and has the capacity to assess both pre- and pro-haptens as skin sensitizers.
  • No increased risk of false negative classifications due to possible limitations in metabolic capacity of the cell system.

Abstract

Hypersensitivity reactions in the skin, clinically manifested as Allergic Contact Dermatitits (ACD), are caused by the ensuing immunological response to low-molecular weight compounds termed skin sensitizers. Such substances, often referred to as haptens, have the inherent property to react with skin proteins and form immune inducing complexes. However, indirectly acting haptens need to be transformed to protein-reactive intermediates either through biotic (pro-hapten) or abiotic (pre-hapten) conversion in order to elicit an immune response.

Conventionally, safety tests of skin sensitizers have been done using animal experiments, but New Approach Methodologies (NAMs) have been developed over the past decades to replace the use of animals in such testing. However, one potential problem faced with the in vitro and in chemico alternatives is the lack of metabolic and chemical activity as compared to an in vivo system, which in turn may lead to false predictions for pre- and pro-haptens.

The GARDskin assay is a next-generation NAM for hazard classification of skin sensitizers. The assay is based on a human dendritic -like cell line and combines genomics and machine learning to achieve a high predictive performance with a large applicability domain. Currently, the method is approaching regulatory acceptance as an OECD test guideline.

The study presented here aimed to explore the applicability domain of the GARDskin assay, specifically the capability to predict indirectly acting haptens. Available data obtained from GARDskin testing of indirectly acting haptens were compiled, resulting in a set of 28 substances. Further subcategorization identified 5 pro-haptens and 11 pre-haptens, while 12 substances were unable to be unambiguously assigned as either exclusively a pro- or a pre-hapten, due to the dual nature of the protein-reactive activity. Skin sensitizing hazard sensitivity of indirectly acting haptens (n=28) was 89% (25/28) while pro-haptens (n=5) and pre-haptens (n=11) were 80% and 100%, respectively. These data support GARDskin applicability in the domain of indirectly acting haptens, demonstrating that the method has the capacity to accurately assess both pre- and pro-haptens.

Ability of the GARDskin assay to Predict Skin Sensitization Response in the Guinea Pig Maximization Test

Joint poster with Risk Science Consortium,
Presented at the 2022 SOT

Rose-Marie Jenvert1, Alexandra Zambriczki Lee2, Ronald P Brown2
1SenzaGen, Lund, Sweden, 2Risk Science Consortium, LLC, Arnold, MD USA

Download a copy

 

Conclusion

  • The GARD®skin assay is able to predict skin sensitization potential in humans with a level of accuracy that is equal to or exceeds that of GPMT and the LLNA.
  • As a result, the GARDskin assay serves as a promising alternative to assess the skin sensitization potential of medical devices.

Abstract

The preclinical safety assessment of medical devices typically involves an evaluation of the skin sensitization potential of the device. The GARDskin assay is being proposed as an in vitro alternative to the animal-based tests, Local Lymph Node Assay (LLNA) and Guinea Pig Maximization Test (GPMT), that are typically used to assess the skin sensitization potential of medical devices. The ability of the GARDskin assay to replace LLNA for prediction of skin sensitization response has been evaluated (e.g., Johansson et al., 2019) but since GARDskin has also been proposed as an alternative to the GPMT, it is important to compare the concordance of the prediction of the GARDskin assay with the in vivo response obtained in both of the animal-based tests.  Based on the results of the GARDskin assay for 122 compounds, this in vitro assay shows a high concordance with the predicted results of the LLNA (87.5%); however, the concordance for results obtained in the GPMT is much lower (71.2%). The concordance of the GARDskin assay and the GPMT is impacted by the relatively high number of false positive results (15 out of 73) compared to the false positives seen in the comparison between GARDskin and LLNA (2 out of 80).   The high number of false positives found when comparing the results from GARDskin and the GPMT results from the inaccurate characterization of the human skin sensitization potential of these compounds by the GPMT. Therefore, the low concordance between the GARDskin assay and the GPMT is due largely to inaccurate predictions of human skin sensitization potential by the GPMT and not by shortcomings of the GARDskin assay. Notably, the GARDskin assay (88.7% accuracy) outperforms the GPMT (83.0% accuracy) in the ability to predict the human sensitization response of compounds in this dataset. The results of this project show that the GARDskin assay is able to predict skin sensitization potential with a level of accuracy that is equal to or exceeds that of the currently accepted animal-based tests, suggesting that the GARDskin assay can serve as a promising alternative to the GPMT and the LLNA, and provide a more human relevant result for assessment of the skin sensitization potential of medical devices.

In vitro method for quantitative potency assessment of skin sensitizers during development of novel materials for intended use in medical devices

Joint poster with Sonova,
Presented at the 2022 SOT

Andy Forreryd1, Ulrika T Mattson1, David Waeckerlin2, Karla Lienau2, Robin Gradin1, Rose-Marie Jenvert1
1SenzaGen, Lund, Sweden, 2Sonova AG, Staefa, Switzerland

Download a copy

 

Conclusion

The GARD®skin Dose-Response assay can be used as a tool for:

  • quantitative potency information of chemicals that might leach out of materials or medical devices.
  • internal decision-making during development of new materials for use in medical devices.

Abstract

New innovative materials for use in medical devices based on acrylates can bring several advantages such as super-absorbency, transparency, flexibility, toughness and hardness.

The manufacturing of acrylates typically involves using a monomer of either acrylate or methacrylate that is polymerized into the final product. The polymerization or hardening of material makes the monomers inert, however several methodologies can be used for polymerization, and they differ in the degree to which they result in a fully polymerized final product. Some products therefore contain more residual monomers than others and human exposure to these well-known skin sensitizers may increase the risk of skin sensitization and allergic contact dermatitis. To assess the risks resulting from exposure to these chemicals, potentially found in medical device material, it is necessary to accurately identify and characterize their skin sensitizing potential.

The GARDskin (OECD TGP 4.106) assay was initially developed for hazard identification of skin sensitizers. To derive potency information, a modification of the standard GARDskin protocol based on dose-response measurements has been proposed. The readout of the assay is a cDV0 value, which corresponds to the lowest concentration required to exceed a binary classification threshold in GARDskin. This concentration correlates significantly with LLNA EC3 and human NOEL values and linear regression models have been established to exploit these relationships for potency predictions. In this study, we explore the potential to use this novel assay for quantitative potency assessment of two acrylate monomers.

The GARDskin Dose-response assay classified both acrylate monomers as skin sensitizers with predicted LLNA EC3 values and human NOEL values of 0.848% and 22.4%, and 230 µg/cm2and 12200 µg/cm2, resulting in final classifications as a strong to moderate skin sensitizer (HP 2) and a moderate to weak sensitizer (HP 5), respectively. The results agreed with information in the ECHA registration dossiers and gathered human data evidence for the respective monomers, illustrating that GARDskin Dose-Response has the potential to replace the in vivo LLNA method for quantitative potency assessment of potential skin sensitizers during development of novel materials for use in medical devices.

Tag Archive for: Skin Sensitization

Nothing Found

Sorry, no posts matched your criteria